CruzOC v1.0.7 Release Notes

Cruz Operation Center (CruzOC) v10.0.7 Release Notes Dec,15 Rev. A01

• Added support for Goldilock Layer 1 Firebreak
•  Managed-Compute model enhancements to enable comprehensive support for AI       training / inference infrastructure orchestration, deployment and management.

Fabric Enhancements and other Fabric Changes

• Enhanced support for EVPN BGP multihoming in Enterprise SONiC.

  • Enhancement - Added support for vlan-mapping for a port channel within a multi-home configuration SD-353

• Enhanced support for an AI backend to enable fine grain tuning and monitoring

Driver Updates - New Device Drivers and New Model Support  

New Device Drivers 

Updated Model Support for Existing Drivers

Resolved Issues

• Provision redundancy group missing channel-group commands under ethernet interface SD-279

• Enterprise Sonic driver not reporting authentication errors correctly during preview resulting in NPE SD-334

• Shared loopback ip address not exposed when creating an MCLAG redundancy group SD-333

• NPE when adding a GPU Server to RAIL Optimized rack SD-330

• Decommissioning fabric underlay connections marks the connection as staged even on failure SD-318

• Unable to preview the configuration when the network configuration has pending updates  SD-315

• Fabric Member not setting default RoCEv2 settings type with AI fabric SD-305

• Enterprise sonic - % Error: Portchannel member configuration not allowed. Eth port has L3 configuration. SD-168

• Enerprise SONiC Fabric MCLAG not using MGNT VRF when needed SD-75

• The right-click menu displays the diagnostic option twice SD-140

• Installer - configuration alarms portlet not showing up SD-199
• Dell idrac discovery and resync failing  SD-127

• Cisco - C9300 driver update SD-101

• Active alarm suppressions cleared post inventory update SD-60